News

Allendale Group
Call: +44 (0)1992 450780

We were approached by a customer of ours who had two of our Ultrasonic Cleaners placed side-by-side for a production job. The idea being, rather than having two Ultrasonic Cleaners, could we work to design a bespoke Ultrasonic Tank for this production job that could replace the two existing Ultrasonic Cleaners.

They commissioned us to design and build their bespoke Ultrasonic Cleaner to both maximise the space they have on the outside, but also on the inside of the Ultrasonic cleaner as well. With this in mind, we carefully worked with our customer to meet their exact requirements.

The details requested by the customer were:

• Internal Dimensions: L 890mm x W 135mm x D 200mm
• Longer Ultrasonic cleaner, with a tank offering a bigger depth.
• Moulded tank with no drain holes to maximise the usage of space.
• No heating

The team worked around the clock to design this bespoke Ultrasonic Cleaner specifically to the customers’ needs within the time frame given. With all this hard work, we were glad that the customer was very happy with the end results.

If you’re interested in what we can do for your specific needs, contact our Technical Product Specialist for a consultation on +44 (0)1992 455925 or This email address is being protected from spambots. You need JavaScript enabled to view it..

One of our most popular products due to its practicality and precision for people working with Drill Presses. We used our Machine DRO Digital Caliper to measure the space needed to install the Pillar Drill Laser in minutes - the measurement came out at 66.75mm.

The Wixey WL133 Drill Press Laser projects a thin set of cross-hairs onto your drill press table precisely where the drill bit will contact the work piece. This allows the user to quickly position and clamp the workpiece in place so that the hole is drilled exactly where needed. This eliminates the need to repeatedly lower the bit to the surface and align the tip of the bit to the desired hole location.

The Drill Press Laser mounts quickly and is easily adjusted to align with the centre of your drill chuck. The cross-hairs will stay on centre even when changing your table height and regardless of your workpiece thickness. Its rugged steel frame construction stands up to heavy use and vibration.

Find out more by visiting our website here or contact our Technical Product Specialist on 01992 455921.

Now in stock 50W 28kHz Ultrasonic Transducer Driver PCB assembly part number US-SP-PC-DRI-50W-28KHZ. Suitable for driving 1 off transducer part number US-SP-TR-28.

The pin head type power connections on the PCB are Molex MV396. For more information about this Ultrasonic Part, please visit https://goo.gl/vmFysy

NOTE: Replacing and/or altering any electronic components within the first 12 months of purchase will void manufacturer warranty. Ultrasonic tanks contain components which operate at lethal voltages, work should only be undertaken by suitably qualified individuals.

With our Ultrasonic Cleaners paired with the correct Allendale Ultrasonic formulated Cleaning Solutions, you will require less time to clean your contaminated/dirty items to a high standard of cleanliness.

So, whatever your cleaning challenge, whether it be Flux, Rust or Grease & Grime, you can achieve the desired cleaning results safely when using the right Cleaning Solution. As shown on the graphic, here are some before & after images of cleaning cycles which we have tested in-house to monitor the level of clean and how long it took to achieve these results.

If you would like more information, please click here for our website or contact our Technical Product Specialist on +44 (0)1992 455925 or This email address is being protected from spambots. You need JavaScript enabled to view it..

This special order item has been delivered to our customer and they have kindly sent us some images of their new 2-Axis Newall DRO Console and encoders which have been fitted to an M350 Harrison Lathe 60" main bed travel with a 15" cross-slide travel (Part No. DRO-NE-610-00367). As you can see from the images, this Harrison Lathe Machine is very large, and with the addition of the Newall DRO system, our customers will have a much better experience of producing work at a higher accuracy, quicker and repeatable.

If you have any questions, please contact our Technical Product Specialist on 01992 455921 or email This email address is being protected from spambots. You need JavaScript enabled to view it. to discuss your requirements.

Information

Event Calendar

Mon Tue Wed Thu Fri Sat Sun
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

Opening Times

 Monday  09:00-17:30
 Tuesday  09:00-17:30
 Wednesday  09:00-17:30
 Thursday  09:00-17:30
 Friday  08:00-16:30
 Saturday  Closed
 Sunday  Closed

*excluding bank holidays

Contact Details

allendale group logo

The Allendale Group Ltd
Pindar Road
Hoddesdon
Hertfordshire
EN11 0BZ
United Kingdom

Tel: +44 (0)1992 450 780

This email address is being protected from spambots. You need JavaScript enabled to view it.